Ductile iron pipeline systems, including pipes, fittings, accessories and joints, consist of various materials.When used for conveying water intended for human consumption, the materials in contact with the water shall meet the relevant requirements of the national standards or regulations in the country of use with respect to effect on
When used under the conditions for which they are designed, in permanent or in temporary contact with water intended for human consumption, ductile iron pipes, fittings and their joints shall not have detrimental effects on the properties of that water for its intended use. Restrained joint in which means provided to prevent separation of the assembled joint. All restrained joints shall be designed to be at least semi-flexible. Produce according to the customer’s requirement.
First, install the locks on the connection section of two pipes, screw the short bolt, then push the locks to the spigot end and socket end separately,adjust the bolt hole place of long bolt on the spigot end and socket end, make sure the holes on two sides are concentric, screw the long bolt, fasten the bolt on socket end first, then the spigot end, at last fasten all the short bolts.
If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.